Online Payment Service

  Home >

10 Gallon BoilCoil™ & 120V Temp Controller
10 Gallon BoilCoilâ„¢ & 120V Temp Controller

Alternative Views:

Our Price: $428.98

Product Code: KIT-10120V


The BoilCoil™ redefines electric heating! Unrivaled performance, speed, and simplicity. Simply plug in a BoilCoil™ immersion heater to an Electric-Tower of Power™ control module for immediate, high efficiency heat. Ideal for indoor brewing and a perfect companion for your BoilerMaker™G2. The New BoilerMaker™G2 kettles can be ordered with the holes pre-punched at the factory, or you can easily install yourself by drilling two small 5/8" holes with our handy drill template. The BoilCoil™ will also fit most competitor's kettles and even kegs! We include a 12ft factory wired cable with our custom plug on one end for the BoilCoil™ and a molded twist-lock plug on the other end ready to be plugged into your controller. Hot, fast, and easy. Just the way you like it.Each BoilCoil™ is engineered to perform optimally in your BoilerMaker™ G2 brew kettle for consistent heating performance, boil quality, and boil-off rates.

Each BoilCoil™ is engineered to perform optimally in your BoilerMaker™G2 brew kettle for consistent heating performance, boil quality, and boil-off rates.

UL listed.

Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your kettle!

Coil configuration hugs the wall of the kettle to encourage convective boil characteristics to drive off DMS and other volatiles and does not interfere with whirlpooling.

The 120V BoilCoil™ includes a 12 ft factory wired cable with a molded twist-lock L5-20P plug on one end, and our custom removable plug on the other end.

Less than Ultra low watt density means NO chance of scorching when used as directed.

Simple installation, requiring only two small 5/8" holes . We will provide the mounting holes in your new BoilerMaker™G2 kettle at the factory or you can install yourself!

Features a professional and reliable connection and sealing system engineered specifically for brewing kettles.

Compatible with the HopBlocker™ kettle filter.

The BoilCoil™ will fit in most competitor kettles and even kegs! See data tab for dimensional drawing and installation template.

The BoilCoil™ requires the use of a power control device capable of de-energizing the heater coil to safely operate.

Couple with our new electric TOWER of POWER™ controller for the ultimate in temperature control. Visit our TOWER of POWER™ page for more detail!

Note - the BoilCoil™ is suitable for heating strike water in your mash tun but is NOT suitable for step mashing. The grain impedes convective flow of the wort and scorching will result. However, our RIMS-Rocket™ is a great choice for step mashing since the grain is never in direct contact with the heating coil.

Blichmann Engineering’s™ TOWER of POWER™ temperature control module is like nothing on the market – a high-quality, RIMS system with ultra-high accuracy! Offered in gas or electric versions, these controllers work in concert with our suite of equipment options to complete your system or act as a freestanding control powerhouse. With the TOWER of POWER™ control module you sacrifice neither accuracy nor precision in your quest for great beer. Be sure to check out the optional Full Tower stand and the compact LTE stand!

Purchase a single control unit for your mash tun, one for your hot liquor tank, or both! Already have a pump and all the plumbing for your system? No problem! All you will need are the control units. Should you need the pump and plumbing in a compact and convenient freestanding configuration, the control stand can be purchased separately. And the TOWER of POWER™ control stand even bolts to our TopTier™ stand with the optional mounting kit. Looking for a more compact stand? Check out our LTE controller stand.

Precision & Accuracy
We aren't kidding when we say the TOWER of POWER™ offers superior precision and accuracy. The control module will hold your mash within +/- 0.5°F (0.28°C). With this level of precision, repeatable with your beer will become the norm in your brewery. For accuracy and precision, you need both a high-quality sensor and a high-quality meter that can read it. The TOWER of POWER™ uses a Class A precision RTD and a high-quality metering circuit found in PIDs and PLCs. Only the TOWER of POWER™ delivers that level of accuracy - so accurate and precise you can use it to calibrate your other instruments!

Auto Ramping
With the TOWER of POWER™ control module, ramp times are fast and automatic, with outstanding control and easy maintenance of +/-0.5°F (0.28°C) stability. Free TOP-Link software and optional communication cable can be purchased to easily program an unlimited number of mash profiles and even monitor and log data on your PC. This level of automation brings reproducible results every time, taking your brewery to the same level as a professional brewery.